Menú Cerrar

Spartan & Titan

ProyectECU Spartan y Titan

Las nuevas ECUs que ProyectECU tiene para ti

Spartan ECU

Spartan

Una computadora programable sencilla pero potente!
Control para motor Full Stand alone, Se programa con TunerStudio.

Control para motor Stand Alone Spartan
MODELO RECOMENDADO PARA HASTA 8 CILINDROS

La ECU viene lista para usar Sensor CKP tipo VR (reluctante), Hall u Optico.
Consta de MAP interno de 4Bar (hasta 45psi)

El kit incluye:
– ECU Spartan
– Arnés de 1m 24 hilos
– Cable USB
– Software y docs

Listado de Entradas y Salidas

-16×16 3D fuel and ignition maps, with base of either TPS (Alpha-N) or MAP (Speed Density)
-After Start Enrichment
-Rev limiting (Spark based, hard and soft)(flames, explosions)
-Cranking specific enrichment, dwell timing and advance
-General logging through TunerStudio
-High speed tooth logging
-TPS calibration through TunerStudio
-Sensor calibration through TunerStudio (Coolant, IAT and O2)
-Warm Up Enrichment (WUE)
-TPS based acceleration enrichment
-Tacho output
-Fuel pump activation/deactivation (With priming)
-Over dwell and over duty protection
-Battery voltage compensation for dwell and injectors
-Modular wheel decoder support.
-Closed loop boost control
-Open loop VVT control
-Deceleration fuel cut off (DFCO)
-Launch control
-O2 based autotune (Registered version of TunerStudio required)

Titan

Titan

Una computadora programable extrema y potente!
Control para motor Full Stand alone, Se programa con TunerStudio. 

Control para motor Stand Alone Titan
MODELO RECOMENDADO PARA HASTA 8 CILINDROS WMI, VVT

La ECU viene lista para usar Sensor CKP tipo VR (reluctante), Hall u Optico.
Consta de MAP interno de 4Bar (hasta 45psi)
Stepper Opcional

El kit incluye:
– ECU Titan
– Arnés de 1m 48 hilos
– Cable USB
– Software y docs

Listado de Entradas y Salidas

-16×16 3D fuel and ignition maps, with base of either TPS (Alpha-N) or MAP (Speed Density)
-Two stage nitrous control
-After Start Enrichment
-Rev limiting (Spark based, hard and soft)(flames, explosions)
-Cranking specific enrichment, dwell timing and advance
-General logging through TunerStudio
-High speed tooth logging
-TPS calibration through TunerStudio
-Sensor calibration through TunerStudio (Coolant, IAT and O2)
-Warm Up Enrichment (WUE)
-TPS based acceleration enrichment
-Tacho output
-Fuel pump activation/deactivation (With priming)
-Over dwell and over duty protection
-Battery voltage compensation for dwell and injectors
-Modular wheel decoder support.
-Closed loop boost control
-Open loop VVT control
-Deceleration fuel cut off (DFCO)
-Launch control
-O2 based autotune (Registered version of TunerStudio required)

Los precios están en MXN (pesos mexicanos). Para ventas fuera de Mexico favor de contactarnos! DEBIDO A PANDEMIA ESTAMOS REALIZANDO ENVIOS CADA 3ER DIA!!