- You cannot add "Sensor CKP hall" to the cart because the product is out of stock.
Hall Cherry CKP Sensor
1,540 MXN
Out of stock
Description
Hall effect crankshaft or camshaft position sensor. It is a new version, distinguished by its red anodized aluminum casing. Threads are M12 and mounting nuts are included. It runs from 5 to 24 volts and offers a nice square wave so there are no variable voltage issues. It has a 1 meter long pigtail and 3 threads. This is what the cables do:
Brown: supply voltage; connect to +5v for 5 volt operation or 12 volt switched power.
Black: output signal. Connects to VR1+. Note that this requires a pull up resistor. This connects to both the supply voltage and the output signal cable. Use a 1K resistor when feeding it 5 volts or a 2.4K resistor when feeding it 12 volts.
Blue – Earth.
specs
Operating voltage: 5 to 24 volts
Maximum surge and reverse voltage: +30 to -24 volts
Required maximum supply current: 6 mA
Maximum output current sink: 20mA
Output Type: Open Collector
Maximum frequency: 15kHz
Temperature range: -40 to +125 degrees C
Nominal Air Gap: 1.5mm
Thread pitch: M12 x 1mm
Total length: 65.5mm, not including cables
Package Material: Aluminum
Sensor orientation: non-directional
The recommended tooth size is a rectangle at least 2.5mm x 6.35mm, with a tooth height of 5.0mm.